Boston Gear® G668 Internal Spur Gear, 32 Diametral Pitch, 14.5 deg Pressure Angle, 0.192 in W Face, 96 Teeth, 2.98 in ID x 3-3/4 in OD, 3 in Dia Pitch, Brass
Boston Gear® internal gears are spur gears turned "inside out." In other words, the teeth are cut into the inside diameter while the outside diameter is kept smooth. This design allows for the driving pinion to rotate internal to the gear, which, in turn, allows for clean operation. Intended for light duty applications, these gears are available only in brass. When choosing a mating spur gear, always remember that the difference in the number of teeth between the internal gear and pinion should not be less than 15 (14.5 deg PA) or 12 (20 deg PA).
Boston Gear® Internal Spur Gear, 2.98 in ID, 3-3/4 in OD, 96 Teeth, 32 Diametral Pitch, 3 in Pitch Diameter, 0.192 in Face Width, 14.5 deg Pressure Angle, Brass
Standard/Approvals | : | PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm. |
Application | : | For parallel shaft applications |